In point to point mode, the correction data is transmitted from the base station to the server, then rovers can log on the server to get the correction data.
FAQ
-
Venus work with TN series receiver
-
How To Use T300 PLUS Base With DJI PHANTOM4
T300 Plus can use as Base station to provide corrections for DJI Phantom4 RTK version. Here will introduce the T300 plus and DIJ Phantom4 settings.
-
How to transfer NMEA to PC from N2
Start the Survey Master and connect the N2 to your controller. Step1: Device --> NMEA 0183 Output Step2: Choose the Bluetooth, set baud rate, and output NMEA that you want. BTW, you can choose “Continue output when receiver restart”
-
How to register FGA perpetual license
Login Microsurvey license system: https://license.microsurvey.com/solo/customers/CustomerHome.aspx
-
ComNav Guide to Static
Before starting your work, you should configure and check your receiver by CRU software.